New Holland L225 » Minnesota Ag Group, Inc., Minnesota
x
x
Minnesota Ag Group, Inc., Minnesota
Minnesota Ag Group, Inc. offers Case IH products
  • Minnesota Ag Group, Inc. offers New Holland Agriculture products
  • Minnesota Ag Group, Inc. offers New Holland Construction products
Minnesota Ag Group, Inc., Minnesota
Hastings
651-437-4164
18202 Nicolai Ave.
Hastings, MN 55033
Call Us Directions
Kasson
507-634-4388
601 8th St. SE
Kasson, MN 55944
Call Us Directions
Northfield
507-645-6643
32907 Northfield Blvd.
Northfield, MN 55057
Call Us Directions
Adams
507-582-3360
211 W. Main
Adams, MN 55909
Call Us Directions
Plainview
507-534-3195
400 10th St. SW
Plainview, MN 55964
Call Us Directions

New Holland L225 / NOT AVAILABLE

New Products / New Holland Ag / Light Construction Equipment / Skid Steer Loaders / L225
Go Back

Double tap to zoom

 

Features

New Holland’s patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Specifications

Model L225
Dimensions  
Overall operating height  
with foundry/excavating bucket short lip, in (mm) 159.7 (4056)
with low profile/standard lip bucket, in (mm) 163.7 (4159)
with low profile extended/long lip bucket, in (mm) 168.8 (4287)
Height to  
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised, in (mm) 122.6 (3115)
Overall length  
without attachment with coupler, in (mm) 117.8 (2993)
with foundry excavation bucket on ground, in (mm) 142.9 (3631)
with low profile bucket, in (mm) 147 (3734)
with low profile extended bucket, in (mm) 152.1 (3863)
Dump  
Dump angle, degrees 55
Dump height  
with foundry/excavating bucket short lip, in (mm). 102.9 (2615)
with low profile/standard lip bucket, in (mm). 100 (2541)
Dump reach (max height), in (mm) 32.3 (821)
Maximum attachment rollback  
Bucket on ground, degrees 34
Bucket at full height, degrees 85
Wheelbase and Clearance  
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan), in (mm) 8 (203)
Angle of departure, degrees 24
Clearance circle  
without bucket, in (mm) 56.2 (1428)
with 60” inch foundry bucket in carry position, in (mm) NA
with 60” inch low profile bucket on ground, in (mm) NA
with 60” inch extended low profile on ground, in (mm) NA
with foundry bucket in carry position, in (mm) 80.3 (2039) with 72” bucket
with low profile bucket on ground, in (mm) 87 (2210) with 72” bucket
with extended low profile on ground, in (mm) 91.5 (2323) with 72” bucket
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Tread width, in (mm) 56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm) 69.6 (1768)
Engine  
Manufacturer/model FPT / F5H FL413
Type Diesel 4-stroke, Turbo, D.I.
Cylinder 4
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in³ (L) 195 (3.2)
Fuel injection HPCR Direct
Fuel #2 diesel
Fuel filter Pre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intake Turbocharged Aftercooled with external CEGR
Cooling Liquid
Engine speeds  
High idle - no load, rpm 2500 +/- 25
Rated - full load, rpm 2500
Low idle, rpm 1150 +/- 25
Horsepower per SAE J1349  
Gross hp (kW) 82 (61) @ 2500 rpm
Net hp (kW) 76 (57) @ 2500 rpm
Peak torque, lb-ft (N•m) 257 (349) @ 1400 rpm
Power Train  
Drive pump mechanical  
Pump to engine ratio 1:01
Displacement, in³ (cc) 46 (2.81)
Flow, gpm (Lpm) NA
Flow at rated engine rpm @100% eff., gpm (Lpm) 29.4 (111)
Charge pressure, psi (bar) 360 (24.5 )
System relief, psi (bar) 5220 (360)
Control Mechanical servo
Drive pump electro hydraulic  
Pump to engine ratio. 1:01
Displacement, in³ (cc). 2.75 (45)
Flow, gpm (Lpm). 28.8 (109)
Charge pressure, psi (bar). 362 (25)
System relief, psi (bar). 5220 (360)
Control. Electro hydraulic
Drive motors  
Max displacement, in³ (cc) 28.7 (470)
Speed @ high idle engine rpm 237
Speed @ optional high speed, rpm 355
Torque @ max displ. and relief pressure, ft-lbs (N•m) 1987 (2694)
Travel speed with spec tires  
Low range, mph (km/h) 7.0 (11.3)
High range (optional), mph (km/h) 10.5 (16.9)
Final drive Single-reduction chain drive
Drive chain  
Size ASA #100
Axles  
Diameter, in (mm) 2.44 (62)
Length, in (mm) 15.6 (396)
Parking brake  
Type. Spring applied, hydraulic release disc
Engagement Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System  
Pumps  
Type.. Gear
Displacement standard aux., in³ (cc) 2.23 (36.6)
Displacement high flow aux., in³ (cc) 1.24 (20.4)
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Loader control valve  
Type… 3 spool / open center / series
Relief pressure, psi (bar) 3046 (210)
Hydraulic filter 4 microns / spin on
Cylinders  
Lift cylinder  
Bore diameter, in (mm) 2.5 (63.5)
Rod diameter, in (mm) 1.75 (44.45)
Stroke, in (mm) 33.5 (851.9)
Closed length, in (mm) 46.9 (1192)
Bucket cylinders  
Bore diameter, in (mm). 3.0 (76.2)
Rod diameter, in (mm). 1.5 (38.1)
Stroke, in (mm). 16.1 (410)
Closed length, in (mm). 24 (610)
Weights  
Operating weight, lbs (kg) 7900 (3580)
Shipping weight, lbs (kg) 7565 (3430)
Service Capacities  
Fuel tank, gal (L) 25.5 (96.5)
Engine oil with filter, qt (L) 10 (9.4)
Hydraulic system  
System capacity with filter, qt (L) 47 (44.5)
Chain tanks (per side), qt (L) 29.5 (27.9)
Rated operating load  
50% tip, lbs (kg) 2500 (1135)
Tipping load, lbs (kg) 5000 (2268)
Breakout forces  
Lift cylinder, lbs (kN) 5080 (22.6)
Bucket cylinder, lbs (kN) 8620 (38.3)
Cycle times  
Raise, sec 3.8
Lower, sec 2.4
Dump, sec 2.6
Roll back, sec 2
  • brand CaseIH2024
  • case ce
  • brand NHAG
  • brand NHCE
  • exmark
  • gravley horizontal
  • krone
  • kuhn knight
  • macdon
  • mahindra
  • woods
  • brent
  • badboy