Exmark LZS801CKA60RA1 » Minnesota Ag Group, Inc., Minnesota
x
x
Minnesota Ag Group, Inc., Minnesota
Minnesota Ag Group, Inc. offers Case IH products
  • Minnesota Ag Group, Inc. offers New Holland Agriculture products
  • Minnesota Ag Group, Inc. offers New Holland Construction products
Minnesota Ag Group, Inc., Minnesota
Hastings
651-437-4164
18202 Nicolai Ave.
Hastings, MN 55033
Call Us Directions
Kasson
507-634-4388
601 8th St. SE
Kasson, MN 55944
Call Us Directions
Northfield
507-645-6643
32907 Northfield Blvd.
Northfield, MN 55057
Call Us Directions
Adams
507-582-3360
211 W. Main
Adams, MN 55909
Call Us Directions
Plainview
507-534-3195
400 10th St. SW
Plainview, MN 55964
Call Us Directions

Exmark LZS801CKA60RA1

New Products / Exmark / Rear Discharge Mowers / Lazer Z S-Series Rear Discharge / LZS801CKA60RA1
Go Back

Double tap to zoom

 

Features

Sorry, currently there are no features but check back with us later.

Specifications

Model LZS801CKA60RA1
Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30 mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter and cup holder
UPC UPC193308119700
Power Components  
Engine Brand Kawasaki
Engine Model FX801V
Engine Displacement 852
Engine Series Command Pro™ EFI
Engine Speed 3750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Engine Spec _S04
Decks  
Width/Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades 3 Blades at 20.50" Length
Dimensions  
Width 66.2 in. (168.1 cm)
Length 79.2 in. (211.1 cm)
Height 70.5 in. (179.1 cm)
Curb Weight 1287
  • brand CaseIH2024
  • case ce
  • brand NHAG
  • brand NHCE
  • exmark
  • gravley horizontal
  • krone
  • kuhn knight
  • macdon
  • mahindra
  • woods
  • brent
  • badboy